About
A bottle that nobody scrubs starts to smell, and no amount of rinsing at a tap fixes it. The Bottle PureVis 2 puts a mercury free UV-C LED in the cap and sets it running on its own every two hours, on the theory that the problem is neglect rather than effort.
Larq's lab figures for the standard one minute cycle are 99.999 per cent of salmonella and 99.99 per cent of E. coli, with cryptosporidium and giardia lamblia reaching 99.99 per cent over a six minute run. Adventure mode extends the cycle to three minutes. What matters as much as the numbers is where the light lands: the inner walls, which a filter never touches and a bottle brush reaches badly.
Filtering is a separate system, a removable straw that sits inside the bottle. The Essential filter handles chlorine, PFAS including PFOA and PFOS, and pharmaceuticals. The Advanced filter adds mercury, lead, HAA5, particulates and BPA. Both are independently tested to NSF and ANSI standards 42, 53 and 401, and a filter runs roughly two months, or about 94 litres, before it needs swapping.
Sensors read the water level and send it to the Larq app, so a daily hydration target fills itself in rather than being logged by hand. The double wall holds a cold drink cold for up to 24 hours, which is the least remarkable thing here and the one you will notice most often.
- Designed in
- United States
- Capacity
- 680 ml or 1 litre
- Material
- Weight
- 376 g at 680 ml, 439 g at 1 litre
- Battery
- 2 to 3 weeks per charge, USB-C
- Refill
- Essential or Advanced filter, approx. 94 litres
Figures as published by the manufacturer. Source

















