About
Anything stuck to the back of a laptop lid usually stops the laptop shutting. That is the whole reason most phone mounts live on desks and car vents instead.
The Edge Pro Core is 2.5 millimetres thick when open, thin enough to sit permanently on a laptop lid without stopping the screen closing, and that one measurement decides everything else about the kit. The Core is milled from aluminium and carries 30 N52 magnets plus four gripping layers across its front and back faces. One face holds a MagSafe phone. The other clamps to an adhesive metal plate on a laptop screen or a wall, or to nothing at all, since the Core detaches and works on its own. Folded it measures 79 by 58 by 5 millimetres and weighs 59 grams. A tablet needs two Cores before it will hold.
The other two modules snap onto the Core magnetically and both measure 56 millimetres across. The wireless charger is 8 millimetres deep and puts out 7.5, 10 or 15 watts, and its detachable USB-C cable runs 1.5 metres and carries up to 60 watts, so it doubles as a laptop cable. The light is 18 millimetres deep and reaches 1,000 lumens across five brightness and colour-temperature steps. Metal rings and discs are included for phones without MagSafe, which means the kit is not strictly a MagSafe accessory at all: it is a magnet system that happens to speak MagSafe.
- Designed in
- Switzerland
- Materials
- Dimensions
- Core 154 x 58 x 2.5 mm open; charger and light 56 mm across
- Weight
- Core 59 g, light 55 g, charger 51 g
- Battery
- 400 mAh in the light: 1 hour at 1,000 lumens, up to 5 hours at the lowest setting
- Colours
- Hyperspace Black or Asteroid Gray
- Charging
- 7.5, 10 or 15 W wireless; 8 mm deep module
Figures as published by the manufacturer. Source

















