About
Most watches carry one water rating. This one carries two, because the second is written for equipment that keeps people alive underwater.
The Apple Watch Ultra 2 is rated to 100 metres under ISO 22810 and separately certified to EN13319, the dive computer standard, down to 40 metres. The dive rating is the harder of the two and it needs hardware to back it up: a depth gauge accurate to within a metre sits inside the Grade 5 titanium case with a water temperature sensor beside it. The same case has been through MIL-STD 810H testing for immersion, freeze with thaw, ice and freezing rain, temperature shock, and shock and vibration. Altitude is covered at the other end of the range, from 500 metres below sea level to 9,000 metres above, and on the wrist the watch keeps working from minus 20 to 55 degrees Celsius.
The screen is the part you notice first. Flat sapphire sits over an always-on LTPO2 OLED, 410 by 502 pixels at 326 to the inch, running up to 3,000 nits in midday sun and down to a single nit inside a tent. Navigation uses dual-frequency GPS, L1 and L5 together, across GPS, GLONASS, Galileo, QZSS and BeiDou. Behind it, the S9 chip is a 64-bit dual-core with a four-core Neural Engine and 64GB of on-watch storage.
Three microphones with beamforming and wind noise mitigation handle calls from the trail, and there is a siren for when calling is not an option. It weighs 61.4 grams in natural titanium and 61.8 in black, which is light for something built to be read at nine thousand metres and forty metres down.
- Designed in
- United States
- Materials
- Case
- Grade 5 titanium, 49mm
- Water resistance
- 100 metres to ISO 22810:2010, EN13319 diving to 40 metres
- Battery
- 36 hours normal use, 72 hours in Low Power Mode
- Display
- Always-On LTPO2 OLED under flat sapphire, up to 3,000 nits
- Fits
- Wrists 130 to 210mm
- Storage
- 64GB
Figures as published by the manufacturer. Source






.webp)









