About
Most power banks are patient things. You plug one in overnight because a big battery takes as long to fill as it does to empty, and there is no way round that. Anker's Prime disagrees.
The Anker Prime 27,650mAh power bank takes 170 watts in across both USB-C ports working together, and Anker times a full recharge at under 43 minutes. Each of those ports runs to 28 volts at 5 amps under Power Delivery 3.1, and 28 times 5 is where the 140 watt figure on the box comes from. They work in both directions, so the pair that charges a laptop is the pair that refills the pack. Anker is careful about the headline number: 170 watts is not continuous, and normally holds only while the bank is above 55 per cent, to spare the cells.
Going the other way, 250 watts is shared across the two USB-C ports and one USB-A. Anker's own figure for the fast port is a 16-inch MacBook Pro with the M2 Pro chip taken to half charge in 28 minutes. A pogo-pin contact on the base accepts 100 watts from Anker's separate charging base, so the bank can refill sitting on a desk with no cable in it at all, and trickle charging is supported for accessories that draw too little to keep most banks awake.
Bluetooth pairs it to Anker's app within about 10 metres, where it reports what each port is doing, plays a sound so you can find it in a bag, and can be told to charge more gently. The protection system, which Anker calls ActiveShield 2.0, is the part you never see working, which is rather the point of a pack that moves this much power through seven cells at once.
- Designed & made in
- China
- Capacity
- 27,650mAh, seven 3,950mAh cells
- Dimensions
- 161.7 x 57 x 49.7 mm
- Weight
- 665 g
- Charging
- 170W in via dual USB-C, or 100W pogo-pin
- Fast charge
- 250W total, 140W per USB-C port
- Range
- Bluetooth to Anker app, about 10 m
Figures as published by the manufacturer. Source











.webp)






