About
Most charging stations for the Apple Watch are really just a tidy place to coil Apple's own cable, with the puck it came with clipped into a slot. Nomad took the puck out of the equation.
The Nomad Base Station has an MFi-certified magnetic Apple Watch charger sunk into its aluminium frame, so the watch lies flat on the body of the station rather than on a borrowed cable. Beside it sits a pad of padded leather over that same chassis. The coil positions are marked on the hide, so a phone lands in the right spot first try. Three Qi coils run underneath at 10 watts each, which is why two phones charge side by side instead of taking turns. Two ports face out of the back: USB-C Power Delivery at 18 watts, USB-A at 7.5. Counting the pad, the ports and the watch puck, Nomad rates the whole thing for five devices at once.
The detail that decides whether a charger survives on a nightstand is the ambient light sensor. It reads the room and dims the charging LEDs once the lights go off. Tap the watch and it wakes into nightstand mode, so it reads as a clock. The integrated puck takes 38 and 40 millimetre cases and 42 and 44, across every Apple Watch generation up to the current one, though it will not charge through a protective watch case. A braided two metre nylon cord runs to the wall. No-slip rubber feet keep the base where you put it, and EU and UK plug adapters come with it for anything between 100 and 240 volts.
- Designed in
- United States
- Materials
- Surface
- Padded leather on an aluminium chassis
- Dimensions
- 10.28 × 7.56 × 1.97 in
- Weight
- 1.43 lb (649 g)
- Also charges
- A second device on the pad, plus USB-C PD 18 W and USB-A
Figures as published by the manufacturer. Source



















