About
Most garden speakers try to hide by pretending to be something else: a box painted to match the wall, or a lump of resin moulded into the shape of a rock. Bang & Olufsen's answer is to stop hiding the speaker and hide the bass instead.
The Beosound Bollard is a single enclosure split into two halves, one of which you bury. The poly composite subwoofer body measures 317 millimetres across and 212 deep, and drops into a hole roughly 18 inches wide and 18 deep before being covered back over with dirt. What stays above ground is a 48 centimetre aluminium pillar holding a 1 inch PEI tweeter and a 4.5 inch midrange. Both halves fire through slots near the top of that pillar, past a 360 degree silicone lens that pushes the sound out across the whole garden rather than down one sightline. In the base of the buried half there is a drain plug, cut out with a utility knife if the ground holds water.
Nothing here plays on its own, because the Bollard is passive. A Beoamp 125.4 feeds it 160 watts of Class D for the tweeter and another 160 for the woofer, running crossover presets that strip the bass out of the satellite and send it down to the sub under the lawn, while a Beoconnect Core handles the streaming. The speaker was developed with Origin Acoustics, who build Bang & Olufsen's outdoor range, and the sleeve comes round or square so the part you can see can be chosen to argue least with the paving around it.
- Designed in
- Denmark
- Dimensions
- Round sleeve 14 cm diameter, 48 cm high; square sleeve 15 x 15 cm, 48 cm high
- Materials
- Range
- 48 to 20,000 Hz
- Colours
- Natural, Black, Bronze
- Power reserve
- Passive; 2 x 160 W Class D from Beoamp 125.4
Figures as published by the manufacturer. Source
















