About
Every indoor bike wears out somewhere, and it is almost always the brake. Felt pads glaze and squeal, magnet packs drag, and both are consumables dressed up as hardware.
The NOHRD Bike V2 holds back a 5.5 kilogram, 40 centimetre flywheel with an eddy current brake, which induces currents inside the spinning metal and lets those currents fight the motion without anything touching the wheel. A planetary gear drives the flywheel at a ratio of 1 to 8. Because nothing makes contact, there are no pads to replace and no noise as the resistance climbs, and the dial on the front right of the frame changes the load continuously while you are still pedalling.
The wood is structure rather than veneer. NOHRD builds the bike by hand in its own workshop in Nordhorn, in oak, cherry, walnut, a dark Shadow and a Vintage finish, and the frame itself does the job of a device holder: a rubber band pulls out of the wood and hooks over the top of a phone or tablet. The touchscreen sits flush in the handlebar and pairs over Bluetooth with NOHRD's own app and with Zwift, BKOOL and Rouvy.
Handlebar and saddle each lock at a range of heights, 27.5 centimetres of lift at the bars and 17.5 at the saddle, with an XS seat post for riders under 160 centimetres. It is rated to 200 kilograms of rider, and it will run off a USB power bank, which is the detail that decides where in a room a bike this heavy can actually live.
- Designed & made in
- Germany
- Dimensions
- 117 x 113 x 60 cm
- Weight
- 60 kg
- Materials
- Finish
- Oak, cherry, walnut, Shadow, Vintage
Figures as published by the manufacturer. Source
















