About
Most mopeds arrive finished. Whatever you want to carry afterwards gets strapped on with clamps, zip ties and hope, and the frame has no opinion about any of it. Vässla started from the other end.
The Vässla epa-1 has eleven reinforced mounting points threaded into its frame, with the screws included, so racks, boxes and a passenger seat bolt straight on rather than clamping around tubing. An AVS adapter takes Atran Velo's baskets and bags. Because the fixings are structural and placed before the frame is welded up, the load sits on the machine instead of on a strap. The other thing settled in advance is the legal class. Every epa-1 is programmed and type-approved at the warehouse as either class 1, which runs to 45 km/h and needs an AM licence, or class 2, which is held to 25 km/h and may use cycle paths. Vässla cannot switch it afterwards, since a different class means fresh type approval and new CoC papers.
Drive is a brushless hub motor in the rear wheel, 2600 W in class 1 and 1000 W in class 2, making 140 Nm, with regenerative braking and an IP67 rating against dust and water. The LiFePO4 battery lifts out from under the saddle in two sizes: 30 Ah and 1.8 kWh, or 50 Ah and 3 kWh. Braking is hydraulic front and rear on twin-piston calipers.
An NFC card or the remote starts the bike and arms an alarm that locks the rear wheel if it is moved, and USB-A and USB-C fast charging for a phone is built in, which is the sort of detail that tells you the accessories were never meant to be an afterthought.
- Designed in
- Sweden
- Made in
- China and Sweden
- Range
- Up to 70 km (30 Ah) or 120 km (50 Ah)
- Weight
- 60 kg excluding battery
- Dimensions
- 170 x 80 x 133 cm, 82 cm seat height
- Charging
- 30 Ah battery 0 to 100 per cent in 4 hours
- Colours
- Black, yellow, white, red, blue
Figures as published by the manufacturer. Source















