About
A robot vacuum that mops usually drags a damp pad around the house and only washes it once it gets back to the dock. The eufy Omni S1 Pro keeps rinsing its mop the whole time it is moving.
The eufy Omni S1 Pro pairs 8,000 Pa of suction with a single roller mop, 290 millimetres wide, that spins at up to 170 RPM and presses down with 1 kilogram of force. The robot carries two reservoirs. One holds clean water and one dirty, so the roller is rinsed with fresh water and detergent as it works and the grey water is collected rather than spread back over the floor. When the robot meets carpet the mop lifts by 12 millimetres, and a detangling side brush keeps hair from winding into a knot.
Back at the tower, the UniClean station empties the robot, washes and refills it, dispenses detergent and dries the mop with heated air at 131°F. Its clean water tank carries an ozone generator that turns ordinary tap water into ozonated water, which removed 99.99% of E. coli in eufy's laboratory tests. Mapping is done by dToF LiDAR. Alongside it sits a 3D MatrixEye system of binocular infrared imaging and an RGB camera that picks out obstacles as small as 2.5 centimetres on a side and cleans to within 2 centimetres of them.
- Designed in
- China
- Dimensions
- Robot 325 x 347 x 96 mm
- Size
- Station 383 x 467 x 670 mm
- Weight
- Robot 5.14 kg, station 8.66 kg
- Capacity
- 2.5 L dust bag, 3.0 L clean water
- Noise
- Under 60 dB vacuuming
- Charging
- 4 hours
Figures as published by the manufacturer. Source

















