About
Three chargers, three cables and three plugs, for a phone, a watch and a pair of earbuds. The K1 collapses all of it into something close to the size of a deck of cards.
It comes in 5,000 and 10,000 mAh, at 15W on the standard and Pro and 25W on the Ultra, using Qi2 so the magnet alignment and the charging speed both match what Apple specifies for MagSafe. Phone output steps down through 15W, 10W, 7.5W and 5W depending on what is attached to it. The watch pad gives 5W and the earbud pad another 5W.
The watch charger is what decides whether a 3-in-1 is genuinely useful, because an Apple Watch needs its own proprietary puck and no quantity of USB-C ports will substitute. This carries one, covering Series 3 onward, the SE and both Ultra models.
Rated capacity sits below headline capacity, as it always does. A 5,000 mAh cell at 3.87V delivers roughly 3,000 mAh at 5V once conversion losses are counted, which is normal and worth knowing when comparing numbers across brands. It also folds into a stand, so a phone charges propped and angled instead of lying flat, which turns a hotel bedside table into somewhere you can watch something.
- Designed in
- Australia
- Awards
- Materials
- Battery
- 5,000 or 10,000 mAh
- Charging
- 15W standard, 25W on the Ultra
- Also charges
- Apple Watch and earbuds at 5W
Figures as published by the manufacturer. Source


















