About
A charger is the one object in a bag nobody expects to tell them anything. This one has a screen on the front that names the iPhone plugged into it and counts the watts going in.
Anker's Nano Charger fits 45 watts into a block roughly the size of a walnut because gallium nitride switches faster and wastes less energy as heat than the silicon inside an older charger. Anker spends part of that headroom on running cool rather than running hot. Thermal pads and grease pull heat out of the block, and a TÜV-certified Care Mode holds the charger up to 20 degrees Celsius below the international safety limit for charging temperature. Measured over a full charge from empty at 25 degrees, the phone's own peak internal battery temperature comes in up to 5 degrees lower than on other 45 watt chargers.
The screen is not a touchscreen, which takes a moment to learn. One press shows the live charging state, two presses switch mode, and a two-second hold rotates the picture for a sideways socket. It goes dark after a minute, so it is not a night light. Anker counts more than twenty screens in total, covering power, temperature and mode. Battery level and model name need an iPhone 15 or later, or an iPad from the tenth generation on; anything else charges normally and simply is not named.
There is one USB-C port and no cable, so bring your own. The version sold in Britain swaps the two folding prongs for a fixed three-pin plug, which takes it to 77.3 millimetres tall and 90 grams: taller in a wall socket, and worth knowing before you plan a trip around it.
- Designed & made in
- China
- Awards
- Charging
- 45 W max: 5V/3A, 9V/3A, 15V/3A, 20V/2.25A
- Dimensions
- 34 x 35.5 x 40 mm
- Weight
- 75 g
- Colours
- Aurora White, Black Stone, Misty Blue, Orange
- Display
- Non-touch, 20+ screens, dims after 1 min
Figures as published by the manufacturer. Source
















