About
Most headphones are built on the assumption that you want both ears covered. Studio work rarely obliges, which is why the earcups on this pair turn 90 degrees.
The Audio-Technica ATH-M50x is a closed-back studio monitor on large-aperture 45 millimetre drivers, with earcups that swivel 90 degrees so one ear can come off the mix and stay on the room. That is why it lives in control rooms. An engineer tracking a band keeps one cup on and one ear free for the talkback and for the player standing in front of them, and the cup that swings flat also lets the pair fold down into a bag. Behind the swivel sit neodymium magnets and voice coils wound from copper-clad aluminium wire, quoted from 15 to 28,000 hertz at 38 ohms and rated to take 1,600 milliwatts at 1 kilohertz. The earcups are circumaural, closing round the ear rather than pressing on it, and every bit of the isolation is passive, done by the seal and the closed shell. Nothing here is switched on.
Three cables come with it, each detachable at the cup: a 1.2 metre straight lead for walking about, a 3.0 metre straight lead for a desk, and a coiled one that pulls from 1.2 to 3.0 metres. All three end in a gold-plated 3.5 millimetre plug with strain relief, and a screw-on 6.3 millimetre adapter puts them into an interface. At 285 grams without the cable, it is light enough that the thing you notice after an hour is the seal, not the weight.
- Designed in
- Japan
- Made in
- Taiwan
- Range
- 15 to 28,000 Hz, 38 ohms, 99 dB
- Weight
- 285 g without cable and connector
- Material
- Neodymium magnets, copper-clad aluminium coils
- Power reserve
- 1,600 mW max input at 1 kHz
- Controls
- Detachable cable, 90-degree swivel earcups
Figures as published by the manufacturer. Source


.webp)




.webp)









