AT-LP70XBT

About

Setting up a turntable is usually the part nobody enjoys. Four coloured tags, a headshell, a counterweight to balance and a tracking force to dial in, and if any of it is out the stylus sits badly in the groove for as long as you own the record.

The Audio-Technica AT-LP70XBT is an automatic belt-drive turntable with the AT-VM95C cartridge fixed into its J-shaped tonearm, so there is nothing to mount, wire or balance. What that removes is the fiddly half of the job, not the upgrade path: the AT-VM95C's 0.6 mil conical stylus pulls straight off the body, and every stylus in the VM95 series shares the same mount, up through elliptical, micro-linear and Shibata profiles. The cheapest tip in the range ships on the arm and the best one in the range drops onto it.

The rest of the deck is arranged to keep noise out of the signal. The chassis is a three-piece anti-resonance construction, the die-cast aluminium platter sits under a felt mat, and the mains conversion happens in an external AC adapter so its hum never enters the case. Wow and flutter measures under 0.25 percent and signal to noise is better than 55 dB.

Wireless is handled by Bluetooth 5.2, carrying about 10 metres to speakers or headphones over Qualcomm aptX Adaptive, aptX and SBC. Wired, a switch sets the built-in preamp to phono or line with 36 dB of RIAA-equalised gain, which means the same deck can feed a powered speaker or an amplifier with no phono input at all.

Designed in
Japan
Material
Dimensions
400 mm (16") × 330 mm (13") × 110 mm (4.3")
Weight
Approx. 2.9 kg (6.4 lbs)

Figures as published by the manufacturer. Source

You might also like

Stanmore III

Stanmore III

$400

Songbook Max

Songbook Max

$600

OD-11 Cloud Speaker

OD-11 Cloud Speaker

$1,000

More in Tech

See all
Beosound Emerge

Beosound Emerge

$1,500

Arc

$899

Premium Wireless Bluetooth Turntable

Premium Wireless Bluetooth Turntable

$400

Featured in

See all

Read about it

See all
Buy at Amazon