About
On most espresso machines, brew pressure is a decision you make once. You set a screw on the pump, put the panel back on, and live with that number for years. Lelit's Bianca keeps the screw, reachable from outside the case, then hands you something far more interesting: a wooden paddle on the brew group that changes water flow while the shot is running.
The Lelit Bianca is a dual boiler espresso machine with a flow control paddle mounted on its L58E group, a design Lelit has registered. Turning the paddle narrows or widens the water path through the group mid-extraction. Start soft for pre-infusion, open up through the body of the shot, taper at the end. You watch it happen instead of guessing. A manometer sits on the group itself and reads pressure at the coffee rather than at the pump, while a pair of gauges on the front keep an eye on the pump and the steam boiler.
Behind the panel are two stainless steel boilers, 0.8 litres for coffee and 1.5 for steam, so a shot can be pulled while milk steams and each side holds its own temperature. Those temperatures, the pre-infusion time and a brew temperature offset are all set from the LCC, an OLED panel on the front. From cold the machine is ready in under 24 minutes. Sleep mode idles the steam boiler and holds the coffee boiler at 70 degrees Celsius.
The 2.5 litre tank sits outside the body, which keeps the water cool, and it mounts on any of three sides. The Bianca will also plumb in and drain directly if you would rather stop filling jugs. Polished AISI 304 stainless steel throughout, with walnut knobs, paddle, lever and feet on the steel version and maple on the black and white ones.
- Designed in
- Italy
- Dimensions
- 23 x 11.4 x 15.4 in (W x D x H)
- Weight
- 27.17 kg
- Capacity
- 0.8 l coffee boiler, 1.5 l steam boiler, 2.5 l tank
- Materials
- Controls
- Flow control paddle, LCC OLED panel
- Display
- OLED (LCC)
Figures as published by the manufacturer. Source














