About
A handheld steamer is usually a compromise: it relaxes a crease, leaves the shirt faintly damp, and you hang it up and wait. The Cirrus 3 is built to skip that last part.
Steamery's Cirrus 3 pairs dry steam at roughly 100 degrees C with a front plate heated to 140 degrees C, the same setting you would pick on an iron, which is what lets a handheld press a collar rather than only soften it. Most steamers leave cloth wet because the steam condenses the moment it meets cool fabric. Here the plate sits directly behind the nozzle, so the moisture the steam puts in gets driven back out during the same pass. The plate is deliberately convex and textured, and the ridges grip the weave as you pull; Steamery says the added friction makes a pass about twice as effective at flattening a crease.
The 90 millilitre tank slides into the aluminium body and locks with a magnetic click, which keeps steam pressure constant however little water is left in it. Limescale traps inside mean there is nothing to descale, ever. It reaches temperature in 25 seconds, shuts itself off after 30 minutes idle, and is rated for 30 minutes of continuous steaming before it wants an hour to cool down.
Small details decide whether a thing like this gets used. The base is flat and solid, so it stands upright between passes instead of lying on its nose and pooling water, and the 2.3 metre woven cord reaches across a room rather than tethering you to the nearest socket. A steaming pad for collars and cuffs, a mouthpiece cover and a storage bag come with it.
- Designed in
- Sweden
- Awards
- Material
- Dimensions
- 24.6 x 14 x 8 cm
- Weight
- 860 g
- Capacity
- 90 ml water tank, 20 g/min steam
Figures as published by the manufacturer. Source
















