About
A mechanical keyboard is usually a box with switches in it. The Cleaver is a solid block of aluminium with the box milled out from the inside, and what fills the space left over matters as much as what was removed.
The Serene Industries Cleaver runs Hall effect switches, which register a press by sensing a magnet pass a sensor rather than by two metal contacts touching. They sit in hotswap sockets, so a switch lifts out by hand and the keycaps come off with it. Under the switches the circuit board is potted in silicone, filled rather than left open to the case, and a silicone core is fused directly to the aluminium chassis. Serene worked through the same problem on the Icebreaker, where a silicone dampener in the bottom lid settled the sound a metal case makes on its own. Here the damping is built into the structure instead of dropped in behind it.
One 1/4-20 inch thread is tapped into the body. That is the thread on the base of a camera, and on the Icebreaker Serene fitted seven of them, enough to hang the keyboard off tripod mounts, monitor arms and NATO rails. The Cleaver keeps one, which is the difference between a mounting system and an option.
At 365 by 110 millimetres and 17.5 millimetres thick, it is the thin answer to the wedge-shaped Icebreaker. Lighting is RGB LED backlighting, keymaps are set in Serene's own browser configurator, and the whole thing is the third object out of the Los Angeles workshop, after the Icebreaker and the Si Cardholder.
- Designed & made in
- United States
- Materials
- Dimensions
- 365 x 110 x 17.5 mm
- Body
- Aluminium milled from a single block, fused silicone core, silicone-potted PCB
- Controls
- Hotswappable Hall effect switches, interchangeable keycaps, USB Type-C
- Fits
- One 1/4-20 in thread
Figures as published by the manufacturer. Source














