About
Pour-over asks you to do arithmetic with one hand while water is already falling from the other. Eighteen grams at a ratio of fifteen to one, and the answer has to arrive before the bed drains.
The Fellow Tally Pro runs a Brew Assist mode that takes the coffee-to-water ratio first, reads the dose on the pan, works out the finished brew weight and then counts you up to it. The gap closes on an OLED display as the kettle empties, which means the correction happens during the pour rather than in the cup afterwards. Two plainer modes sit behind it: a timer beside the weight in grams, and a general weighing mode that also reads ounces, pounds and millilitres. Readability is 0.1 grams.
The weigh pan twists off for cleaning, but nothing here goes near a dishwasher, because Tally Pro is water resistant rather than waterproof. Charging is over USB-C at 5 volts and 1 amp, and a full charge takes one to two hours. Materials are silicone, glass, a metal dial, anodised aluminium and plastic.
One charge gives thirteen hours of continuous weighing, which Fellow reckons works out at a charge every month or two for most people. The one habit worth keeping is packing the shims back under the weigh pan before you travel with it, since the thing that protects the load cell is a small piece of plastic you will otherwise leave on the counter.
- Designed in
- United States
- Made in
- China
- Materials
- Dimensions
- 177 × 150 × 33 mm
- Weight
- 553.5 g
- Capacity
- 2,500 g, readable to 0.1 g
- Charging
- USB-C, 5 V / 1 A, 1 to 2 hours
- Battery
- 13 hours continuous weighing
- Water resistance
- Water resistant, not waterproof
Figures as published by the manufacturer. Source
Alternatives
More from Fellow
You might also like
More in Coffee
See allStaff Pick

Demi
$795
















