About
Every brewer you have used works with gravity or against a mesh. A pour-over lets water fall through the grounds and away; a French press steeps and then strains through a disc. The BIRD does neither, and the difference is a turn of a wingnut.
The Weber Workshops BIRD is the first no-bypass brewer to pull coffee through with piston-driven vacuum instead of gravity, inside a body of 3mm borosilicate glass. Grounds and up to 400 grams of water sit trapped together in the stainless brewing pod, agitated by hand, so the extraction starts as a full immersion. Then the wingnut at the top gets turned. That raises the drive shaft, and the vacuum it creates pulls the brewed coffee down through either a reusable steel mesh filter or an Abaca paper filter made in Japan by Cafec, leaving the spent grounds above. Steep, then pull: the cup ends up with a body closer to a French press, carrying the clarity a paper filter usually charges you body to get.
The parts list reads like hardware rather than kitchenware. The tube is 3mm borosilicate glass with a fused bottom disc, the drive shaft stainless 304, and the wingnut and crown solid brass beneath an anodised aluminium cap, with a handle in either metal or glass. One brew takes 20 to 35 grams of ground coffee. It was designed with the industrial designer Christopher Flechtner over more than a year of iterations, which shows in the fact that every part comes apart by hand for a rinse, and in the plain warning that follows from all that brass and fused glass: nothing here goes in the dishwasher.
- Designed in
- Japan
- designer
- Christopher Flechtner
- Made in
- Taiwan
- Material
- Dimensions
- 85 x 180mm
- Weight
- 830g
- Capacity
- Up to 350ml brewed
- Volume
- Up to 400g brew water
- Film
- Steel mesh or Cafec Abaca paper
Figures as published by the manufacturer. Source
Alternatives
More from Weber Workshops
You might also like
Staff Pick

Demi
$795















