About
A single driver in an earphone has to be two things at once, and it cannot be. A diaphragm wide enough to move air for bass carries mass. Mass is slow in the treble, which is where smeared detail comes from.
Campfire Audio's Iris splits the job in two: a 10 mm dynamic driver takes the lows and mids, and a single balanced armature is left to do nothing but the highs. The dynamic driver's diaphragm is coated in amorphous diamond-like carbon, stiff enough to start and stop cleanly at that diameter. The balanced armature is a tiny sprung reed, and it handles the top end where the bigger diaphragm's weight would blunt it. Campfire shapes the air in front of both with what it calls precision acoustic geometry, then vents the housing so pressure equalises on either side of the diaphragm. That vent is the reason your ears do not feel plugged after an hour.
The shell is 3D-printed acrylic, clear enough to see the work inside, with stainless steel at the nozzle and around the custom MMCX socket, so the two parts that get handled most are metal rather than plastic. Impedance is 14.8 ohms at 1 kHz, an easy load for a phone. Two cables are supplied, 3.5 mm and 4.4 mm balanced, each running four silver-plated copper conductors. The folding leather wallet they pack into is handmade in Portugal.
Behind all of it sits a three-person engineering team: Ken, Vali and Ben, who have drawn every Campfire earphone since 2015. That is a small enough group that the acoustic geometry and the choice of socket metal were almost certainly argued over by the same people.
- Designed & made in
- United States
- Range
- 5 Hz to 20 kHz
- Shell
- 3D-printed acrylic with stainless steel nozzle
- Material
- Controls
- Custom MMCX socket, detachable cable
Figures as published by the manufacturer. Source
Alternatives
You might also like
Staff Pick

Transparent Speaker
$1,200












.webp)

