About
A turntable is one of the few pieces of audio kit people already expect to fiddle with: a new cartridge here, a fresh stylus there. Transparent has taken that expectation and run it through the whole machine, including the parts nobody usually gets to touch.
Most audio electronics age out as a single unit, because the clever part is soldered to the part that makes sound. The Transparent Turntable puts its radio in a module you can pull out, so when Bluetooth 5.0 stops being current the deck does not have to follow it into a drawer. The same logic runs the rest of the object. The pre-mounted Ortofon OM5E sits on a standard half inch mount and can be swapped for any half inch cartridge, the headshell uses a standard SME fitting, and the elliptical diamond stylus is replaced on its own with an Ortofon 5E. Every unit carries a QR coded digital product passport that links back to its own materials, environmental impact and upgrade record, and repairs and upgrades are done in person at the company's circular centre in Stockholm. The stated aim is to be the first circular tech brand.
The playing numbers are steady rather than showy. Belt drive at 33 1/3 and 45 RPM, wow and flutter inside 0.25 percent at both speeds, signal to noise of 70 dB or better. The tonearm gives 220 millimetres of effective length with 19.5 millimetres of overhang and a recommended tracking force of 1.75 grams. The phono stage is built in with a switch to turn it off, which matters if your amplifier already has one, and the Bluetooth works both ways, transmitting to a speaker or receiving from a phone with aptX Low Latency on a Qualcomm CSR8670C.
- Designed in
- Sweden
- Awards
- Material
- Movement
- Belt-driven system
- Dimensions
- 410 x 125 x 320 mm (16 x 5 x 13 in)
- Weight
- 6.5 kg (14 lb)
- Controls
- Bluetooth 5.0, RCA line-out, 3.5mm optical/analogue, USB
Figures as published by the manufacturer. Source

















