About
Buy a monitor on its brightness number and you are usually buying a peak it can hold for a few seconds. The interesting engineering on Apple's Pro Display XDR is not on the front of the glass at all. It is the lattice milled into the aluminium round the back, which more than doubles the surface area exposed to air.
The Pro Display XDR holds 1,000 nits across the entire screen indefinitely, and peaks at 1,600 nits on HDR material, because sustained brightness is a heat problem before it is a light one. Most desktop displays sit near 350 nits, and the pro ones that go brighter manage it in bursts before dimming to cool themselves down. The lattice works as a heat sink, with inlet and exhaust vents breathing through the same pattern so hot air leaves the enclosure instead of being drawn straight back in. That is what lets an aluminium case an inch thick carry the load.
The backlight is unusual too. Rather than a strip of white LEDs along one edge, 576 blue LEDs sit in a grid, each with its own reflector and lens, and their light is converted to white by a sheet built from hundreds of layers. Twelve controllers modulate the array, and Apple's timing controller chip drives the LEDs at more than ten times the refresh rate of the LCD in front of them. Bright and black can sit next to each other without a halo between them, which is where the million-to-one contrast figure comes from.
The 32-inch panel runs 6016 by 3384 pixels behind a 9 millimetre border, and on the nano-texture version the scattering pattern is etched into the glass itself rather than coated on top. Pro Stand and the VESA adapter were always sold separately, an arrangement that generated a great deal of comment at the time, and Apple has since replaced the display with the 27-inch Studio Display XDR.
- Designed in
- United States
- Awards
- Materials
- Display
- 32 inch, 6016 by 3384 pixels at 218 ppi
- Finish
- Standard glass or nano-texture glass
- Weight
- 7.48 kg without a stand
- Body
- Aluminium enclosure, one inch thick
Figures as published by the manufacturer. Source


















