About
Most sit-stand desks are a steel frame with a laminate board bolted on, because a motorised base plus a real timber slab is expensive to build and heavy to lift. Oakywood went the other way and started with the wood.
The Oakywood Standing Desk Pro tops a LINAK-based lifting frame with 40 millimetres of solid oak or walnut, cut and finished at the company's own workshop in Stare Bystre. LINAK is the Danish actuator maker, and the specification shows it. Two motors move the top at 60 millimetres a second while staying under 40 decibels, quiet enough that a shared room barely registers the change. The frame travels from 63 to 128 centimetres, low enough for a proper sitting position and high enough for almost anyone standing, and it carries up to 100 kilograms on the way up.
Collision protection is doubled up. A piezo sensor sits in the columns and a gyroscope in the controller, so the top stops itself against a chair arm or a windowsill rather than grinding on. The DPI1C panel stores four preset heights, and over Bluetooth the desk pairs with the Desk Connect app, which can prompt you to change position through the day.
Tops come in oak, light oak, walnut and a black stained oak, in solid wood or a lighter hardwood-veneer plywood, all finished with Osmo oil wax. Standard sizes run from 120 by 60 to 170 by 85 centimetres, and custom widths go to 300. Assembly takes around ten minutes. Cables drop straight through magnetic grommets in the top, which is the sort of detail that decides whether a desk is still tidy a year in.
- Designed & made in
- Poland
- Material
- Sizes
- 120 x 60 to 170 x 85 cm
- Capacity
- 100 kg
- Colours
- Oak, light oak, walnut, black stained oak
- Finish
- Osmo oil wax
Figures as published by the manufacturer. Source

















