About
A wooden laptop riser is usually undone by its joints. Not the timber, which is stronger than it needs to be, but the places where two pieces of it meet.
Oakywood's Laptop Stand is cut from solid oak or American walnut and rated to carry 100 kilogrammes, a figure the workshop credits to its own method of joining the wood rather than to the species. Two hundred and twenty pounds, sitting on a top panel 1.8 centimetres thick, is worth reading twice. The oak is sourced in Poland and the walnut is American; the black version is that same Polish oak with a stained surface. Edges are bevelled at 45 degrees, which is most of what keeps a block of hardwood from reading as a block of hardwood. The finish is an eco wax oil, chosen because it seals the grain without clogging the pores of the wood.
Across the top runs a powder-coated steel grip, which stops the laptop sliding down the angle. Powder coating is electrostatic paint baked on rather than sprayed and dried, so the steel shrugs off knocks and damp without corroding at the edges.
There are two sizes. The 13 to 14 inch stand carries a 31 by 20 centimetre top panel, the 15 to 16 inch a 36 by 23. Either one clears enough room underneath for whatever was cluttering the desk, and Oakywood plants a tree for every product bought.
- Designed & made in
- Poland
- Materials
- Dimensions
- 45 x 22 x 14 cm (13 to 14 inch) or 50 x 25 x 15 cm (15 to 16 inch)
- Finish
- Eco wax oil
- Thickness
- 1.8 cm top panel
- Sizes
- 13 to 14 inch, 15 to 16 inch
Figures as published by the manufacturer. Source
Alternatives
More from Oakywood
You might also like
More in Workspace
See allStaff Pick

k•no•b•1
$439
















