About
Most metal card cases are folded from sheet or milled from a block, and you can see it: a bevelled lip here, a weld line there, a hinge pinned on from outside. The Summit has none of those seams, because it was never assembled in the first place.
Craighill's Summit Card Case is a metal injection moulded stainless steel shell that holds up to nine cards and opens on a spring rather than a seam. Metal injection moulding starts with fine steel powder mixed into a wax-like binder, which is injected into a mould the way a plastic part would be, then sintered in a furnace until the binder burns off and the powder fuses solid. The shape comes out of the mould already whole. That is why the edges read as continuously rounded instead of bevelled or welded, and it is what let Craighill redesign the case around a fully enclosed hinge, sealing a mechanism that sat exposed on the earlier open-backed version. Press it and a single spring pushes the stack of cards up and out under a thumb. There is no stitch of leather anywhere on it, and the steel body doubles as shielding against the wireless read that some contactless cards and passports carry.
The same moulded body underpins both finishes. Brushed stainless steel stays as it is; the Vapor Brass version takes a PVD coating, a vapour-deposited metal layer that Craighill says will develop a natural patina with handling rather than holding one uniform tone. Which is to say the brass one is designed to stop matching the photograph.
- Designed in
- United States
- Made in
- China
- Material
- Colours
- Stainless steel, Vapor Brass (PVD-coated brass)
- Card capacity
- Up to 9 cards
- Dimensions
- 10.2 x 6.4 x 1.3 cm (4 x 2.5 x 0.5 in)
Figures as published by the manufacturer. Source
Alternatives
More from Craighill
You might also like
More in Carry
See allStaff Pick

TPT Slide Titanium Pocket Tool
$89
















