About
Most oil burners are a dish on legs, assembled from parts that eventually work loose at the joints. This one has no joints to work loose.
Aesop's Brass Oil Burner is investment cast in solid brass and then crafted, finished and polished in Sydney by the studio that designed it. Investment casting starts with a copy of the object in wax. The wax is coated in ceramic and fired, which hardens the shell and melts the pattern out of it, and molten brass is poured into the space the wax left behind. What comes out is one continuous body, no seam and no joint, which matters for an object heated and cooled every evening. Brass also conducts heat readily, so the metal around the well warms with the flame rather than leaving the dish to do all the work alone.
The whole thing comes down to three parts: a lid, a well for the oil, and a cradle underneath for the candle. Using it is five to ten drops of an Aesop Oil Burner Blend in the well and one standard tea light below. Lift the lid, light the candle, put the lid back. Once the brass has cooled, the well wipes out with a damp cloth or a mild detergent.
The brass is left bare, which means it oxidises. Aesop's own instruction is to let the patina happen, and it will, unevenly, wherever your hands and the heat land most often. The alternative is a brass polishing solution and a return to the original finish, as often as you care to do it.
- Designed & made in
- Australia
- product designer
- Henry Wilson
- Material
- Dimensions
- 125 x 110 x 65 mm
- Weight
- 900 g
- Finish
- Bare brass, left to patina
Figures as published by the manufacturer. Source



















