Beosound 2

About

Every speaker you have owned has had a front. That is why rooms have a sweet spot, and why moving a speaker usually means moving a chair to face it.

The Beosound 2 is a 105 watt Bang & Olufsen speaker built into an aluminium cone, with an acoustic lens inside that cone that spreads the output through a full 360 degrees. The lens takes what leaves the drivers and pushes it horizontally all the way round, so there is no front and no back to aim. Four drivers divide the work behind it: a 5 1/4 inch woofer on two 30 watt channels, two 2 inch mid-ranges on 15 watts each, and a 3/4 inch tweeter on another 15, class D throughout, covering 33 to 23,400 hertz. Active Room Compensation then works out where the speaker is standing and trims the bass that a corner or a nearby wall would otherwise exaggerate, which is the other half of being able to put it anywhere.

Aluminium was chosen for stiffness as much as for looks. A wall that does not flex adds nothing of its own to what you hear, and the unbroken surface gives the sound nothing to catch on as it leaves.

The top of the cone is the control panel. A proximity sensor lights it as your hand comes near, the outer ring turns for volume, and four buttons each hold a station or a playlist, so the usual reach for a phone is optional. Everything else arrives over Wi-Fi, Bluetooth 5.3, AirPlay, Google Cast, Spotify Connect, Tidal Connect or Beolink multiroom, with Ethernet and a line-in over USB-C for the sources that still prefer a cable.

Designed & made in
Denmark
designer
Torsten Valeur
Materials
Dimensions
20 x 43.1 x 20 cm
Weight
4.1 kg
Coverage
Rooms of 10 to 60 square metres
Range
33 to 23,400 Hz
Controls
Proximity-lit top panel, volume ring, 4 presets

Figures as published by the manufacturer. Source

You might also like

Sub 4

Sub 4

$1,800

Arc

$899

Record 1

$1,099

More in Tech

See all
Songbook Max

Songbook Max

$600

Stanmore III

Stanmore III

$400

AT-LP70XBT

AT-LP70XBT

$299

Featured in

See all

Read about it

See all
Buy at Amazon