About
The word "Balanced" on a turntable usually signals a marketing department at work. Here it names a socket.
A cartridge is a balanced source by nature: it generates a positive and a negative voltage per channel, four wires in all. Most decks fold two of those into ground on the way out. Pro-Ject's Debut PRO S Balanced carries all four out through a mini XLR instead, which matters because of how small a phono signal is. Pro-Ject puts it at roughly a thousand times lower in voltage than a CD or streaming output. At that level the wifi router and the phone charger in the room are riding on the same cable, and a normal RCA pair has no way to tell their hum from the music. A balanced connection sends both halves of each channel down the wire, so the input at the far end can suppress whatever noise both halves picked up along the way.
The rest is built to match that ambition. The 300 millimetre die-cast aluminium platter gets an extra balancing step on the machine and an inner ring of thermoplastic elastomer to soak up resonance, and it is anti-magnetic, so a moving coil cartridge can work above it. Speed comes from an electronically regulated synchronous motor, with wow and flutter quoted at 0.16 percent at 33 rpm. The tonearm is a 10 inch S-shape in aluminium with an SME connector, 254 millimetres of effective length and 8 grams of effective mass, and both azimuth and vertical tracking angle adjust at the arm base, held by two grub screws.
Every part is finished matte black except the spindle, which is polished, and that is the one piece you look at while a record plays.
- Designed in
- Austria
- Made in
- Czech Republic
- Materials
- Plays
- 33, 45 and 78 rpm, electronic speed change
- Dimensions
- 462 by 145 by 345 millimetres, dust cover closed
- Weight
- 7 kg
- Finish
- Matte black, polished spindle
Figures as published by the manufacturer. Source
Alternatives
More from Pro-Ject Audio
You might also like
More in Tech
See allStaff Pick

A2+ Wireless Speakers
$279

















