About
A countertop soda machine that plugs into nothing is either a compromise or a decision. The Carbonator 3 is the second one.
The Aarke Carbonator 3 carbonates water using a hand lever alone, with no cord, no plug and no batteries, inside a shell of SUS304 stainless steel. Pull the lever down and gas moves from the cylinder into the bottle. Aarke suggests one to three pumps and puts no ceiling on it, so sharper water is a matter of pulling again. The bottle is food-grade virgin PET, one litre, with the fill line marked at 800 millilitres, and because it is plastic the machine needs no pressure chamber built around it. Aarke's larger Carbonator Pro does need one, since a glass bottle under gas pressure has to be enclosed. That is also the reason a glass bottle must never go near a Carbonator 3.
Durability here was settled by machine rather than by claim. Aarke's engineers built a rig that ran the Carbonator 3 through more than 10,000 carbonation cycles, identified the parts that proved sensitive to repeated use, and reworked those parts while the testing carried on. It takes standard 400 to 425 gram cylinders from AGA, Linde and Sodastream, though not Sodastream's Quick Connect type, and one cylinder is good for around 60 litres. Aarke counts that as roughly 100 small single-use bottles kept out of the recycling per cylinder.
The bottle is designed to come apart at the end of its life: the metal base unscrews, the cap comes off, and the parts go into recycling separately. Designed and engineered in Sweden, which is where the argument for a lever over a motor tends to start.
- Designed in
- Sweden
- Made in
- China
- Material
- Dimensions
- 41 x 15.5 x 26 cm
- Weight
- 1.5 kg
- Capacity
- 1 litre bottle, fill line at 800 ml
- Fits
- 400 to 425 g AGA, Linde, Sodastream cylinders
Figures as published by the manufacturer. Source
















