About
Most hair dryers get quieter by slowing down. Laifen got quieter by spinning faster and moving the noise somewhere you cannot hear it.
The Laifen Swift's brushless motor, designed in house, turns at up to 110,000 rpm and pushes air at 22 m/s, which is what replaces the large slow motor and long barrel of a conventional dryer. Holding that speed is a balancing problem. The fan blades are cut from T6061 aircraft-grade aluminium alloy to a tolerance of 0.001 mm, then laser-calibrated until the whole spinning assembly balances to within a milligram. Without that, the shell would shake itself apart long before the motor reached its rated speed.
Speed usually means noise. Here the motor's whine is pitched above 20 kHz, past the top of human hearing, and third-party testing puts the dryer at an average 59 decibels at full power. Heat is watched rather than set once and left: a microprocessor samples temperature 100 times a second, air is capped at 85°C, and a long press cycles through hot, warm and cold. Laifen's own testing puts short hair at one to two minutes and shoulder-length hair at five to six.
The motor is rated for 1,000 hours, which Laifen counts as roughly 16 years at ten minutes a day, so the thing most likely to end this dryer's life is a move abroad. It is not dual voltage. The 120 volt version cannot be switched to 220, not even through an adapter, and all three nozzles are in the box regardless of which one you were expecting to pay extra for.
- Designed in
- China
- Materials
- Body
- Nylon and fibreglass
- Dimensions
- 277 x 70 x 89 mm
- Weight
- 407 g without the cord
- Noise
- 59 dB average at full power
Figures as published by the manufacturer. Source

















