About
Every drill you have ever used tells you its torque setting with a numbered collar that clicks as you twist it, and every one of those numbers is a guess about a spring. Hoto removed the collar.
The Hoto Cordless Brushless Electric Drill sets its clutch electronically across thirty numbered levels, chosen with two buttons and read off a screen rather than a ratchet ring. A conventional clutch is a spring and a pawl that slip when the load passes a roughly calibrated point. Here the motor simply stops pulling when the level is reached. Level 1 is the gentlest and level 30 the strongest, peaking at 30 newton metres, and the manual asks you to stay below 5 in anything soft enough to split. From level 16 up the reaction is strong enough that Hoto wants both hands on the tool.
A slide switch swaps the gearing: 0 to 1,400 rpm for drilling, 0 to 370 rpm for driving screws, with a pressure sensitive trigger across the whole of both ranges. Pulse mode runs the motor in short low-speed bursts, which keeps a bit from skating off the mark or rounding out a screw head.
The screwless PC-ABS body weighs 882 grams. Four lamps on the display each stand for a quarter of the charge, the pack will not drive the chuck while it is plugged in, and the tool shuts itself down after a minute of being left alone. Eighteen pieces come with it: ten S2 steel driver bits, four wood drills from 4 to 7 millimetres and four metal drills from 3 to 6 millimetres. Hoto rates the drill for wood, metal, plastic and brick, and rules out concrete and stone.
- Designed in
- China
- Materials
- Dimensions
- 185 x 180 x 54 mm
- Weight
- 882 g
- Battery
- 12 V, 2,000 mAh lithium-ion
- Charging
- USB-C, 5 V 3 A
- Body
- Screwless PC-ABS
- Range
- 0-1,400 rpm drilling, 0-370 rpm driving
Figures as published by the manufacturer. Source

















