About
Every cordless drill has the same collar: a numbered ring you twist until it clicks, trusting that 7 means something repeatable. It rarely does.
A mechanical torque collar is a spring pressing on a ring of teeth. You pick a number, the clutch slips at roughly that force, and roughly is the operative word. Xiaomi's 12V Max brushless drill replaces that ring with a round screen and a knob that turns through 30 electronic stages, reading back the mode and the setting as you go. In screwdriving mode the knob steps torque output through those 30 stages to a ceiling of 30 newton metres. Push and twist the gearbox into drilling mode and the same 30 stages set top speed instead, up to 1,400 rpm unloaded. An automatic mode hands the decision to a chip that reads resistance and cuts the drive once a screw is tight, and a pulse mode turns the bit in short bursts so it does not tear through soft material.
The motor is brushless, so the coils are switched electronically rather than by carbon blocks rubbing against the spinning core. Nothing sparks, less charge is lost as heat, and there are no brushes to wear out and replace. The 2,000 mAh cell lives inside the handle instead of clipping on as a separate pack, and Xiaomi puts a full charge at 550-odd self-tapping screws into pine, or 22 holes through 6 millimetre steel plate.
The shell hides its fixings: PC and ABS with no screws showing anywhere on it, under a matt metallic coating, with soft TPU rubber down the front of the grip. It is not rated for concrete, which is the honest limit of a 12V tool rather than an omission, and worth knowing before you point it at a wall.
- Designed & made in
- China
- Awards
- Materials
- Dimensions
- 185.5 x 179 x 51.5 mm
- Battery
- 2,000 mAh lithium-ion, charged over Type-C
- Body
- PC and ABS with a TPU grip
- Controls
- 30-stage knob, screen readout, auto and pulse modes
- Range
- 30 Nm torque, 1,400 rpm unloaded
- Finish
- Matt metallic coating
Figures as published by the manufacturer. Source
















