About
A desk tray is usually the cheapest thing on a desk: a folded rectangle of sheet metal, bought without much thought, holding a pad of notes at an angle nobody chose. This one costs more than the notes will ever cost, and it was cut out of a solid block.
Blanked's Note Tray is a four inch square milled from a single billet of aluminium, so the floor, the walls and the outer faces are one continuous piece of metal, 1.25 inches thick at the rim. Pressed and folded trays ring when you set something down on them, because the walls are thin and unsupported, and their corners come out however the tooling left them. A billet has no seams to ring through. The recess is removed rather than formed, which means the inside dimension is a cut, not a bend, and it holds one pad of sticky notes and nothing else. Underneath sits a 3M silicone base, the part that stops four inches of machined aluminium travelling across the desk as you pull a note off the pad.
Blanked expects the surface to change, and says so. Its care guide asks for a soft cloth with water or a mild pH-neutral soap, no abrasives and no solvents, and states plainly that the marks arriving with use are irreversible. The anodised speckle silver finish carries slight tonal variation from the outset, inherent to the anodising process, so no two trays read quite the same before a single note has been stuck to one. The tray extends the studio's office range, worked in metal, wood and stoneware, and shaped throughout by cutting away until only the form is left.
- Designed in
- Canada
- Material
- Finish
- Speckle silver anodised
- Dimensions
- 4 x 4 x 1.25 in
- Surface
- 3M silicone anti-slip base
- Fits
- One pad of sticky notes, not included
Figures as published by the manufacturer. Source




















