About
A pleat is usually decoration. On Alessi's Plissé kettle it is the reason a thin wall of resin stays rigid enough to hold 1.7 litres of boiling water without flexing.
Michele De Lucchi's line about the collection is that a form without folds is only a volume without form, and the kettle takes him at his word: the body is BPA free thermoplastic resin folded like a sheet of paper, and the folds stiffen it. Alessi rates the element at 2400 watts. The lid springs up on a button and shuts with a click you can hear. The ON/OFF lever lights through the heating cycle and drops back to off a few seconds after the water boils, and a dry-run cut-out kills the power if you switch it on empty, or with less than about a cupful inside. Fill it past the MAX mark and boiling water comes back out of the spout, which is the one failure mode the electronics cannot catch for you.
The limescale filter pulls straight out of its slot behind the spout, and it is the only part Alessi says can go in the dishwasher; the kettle itself gets rinsed inside and wiped outside. For a second boil, wait about a minute before pushing the lever again. Every kettle is run on the line before it is boxed, so Alessi warns that a trace of moisture inside a new one is normal rather than a leak. It has been made since 2018, and there is a 1 litre version, the MDL06/1, if seven cups at once is more than you need.
- Designed in
- Italy
- designer
- Michele De Lucchi
- Capacity
- 1.7 litres
- Materials
- Controls
- ON/OFF lever, shuts off automatically at boiling point
- Dimensions
- 29 cm tall, 16 cm wide
- Storage
- Cable winder under the power base
Figures as published by the manufacturer. Source



















