About
A shaver head that skips is not a sharpness problem. It is a geometry problem: most foil meshes sit in a shallow curve, so when the angle of your jawline or top lip changes, the mesh lifts off and you go back over the same patch twice.
The Laifen T1 Pro's ArcBlade foil bends through 148.5 degrees, against the 102.5 degrees the company quotes for a conventional head, which keeps more mesh on the skin as the surface turns under it. The mesh is 0.055 mm thin and low in nickel, so the blade sits nearer the face and sensitive skin has less to react to. Behind it, a linear motor runs at 12,000 cuts a minute under a PID algorithm that damps the buzz before it reaches your hand. The body is one piece of aluminium, which Laifen says takes 8,000 seconds on the milling machine and holds a tolerance of 0.01 mm, and the head sits 15 degrees off the handle, roughly where a wrist wants it.
Two versions leave the factory. The Standard adds a trimmer head and three comb guides at 5, 3 and 2 mm for beard work; the Stubble edition is the shaver head alone. Laifen reckons a full charge covers four months of two-minute daily shaves, and a minute on the cable buys eight minutes of shaving. The blade head itself is rated for six to eight months, or 200 to 250 shaves, before it wants replacing, which is the number worth writing down somewhere, because it is the one that turns a good shave into an ongoing arrangement.
- Designed in
- China
- Awards
- Materials
- Body
- Aluminium alloy, CNC milled from one piece
- Weight
- 93 g, 12 mm handle, 16 mm head
- Battery
- 120 minutes, charged over USB-C
- Water resistance
- IPX7, one metre for 30 minutes
Figures as published by the manufacturer. Source


















