About
Most computers already make sound, which is the problem. The converter inside a laptop is a cheap part squeezed next to everything else that generates electrical noise, and no amount of speaker cabinet can undo what it does to a signal.
The Audioengine A2+ answers that by keeping the music digital all the way to the speaker: plugged in over USB-C, the pair bypasses the computer's own audio hardware entirely and hands the signal to a 24-bit DAC built into the left cabinet. The amplifier sits in there too, Class AB, rated at 15 watts RMS per channel into 4 ohms, and Audioengine quotes that number the hard way, measured under the US Federal Trade Commission's amplifier rule, with 60 watts total peak on top. Each side runs a 2.75-inch aramid fibre woofer and a 0.75-inch silk dome tweeter. The right cabinet is passive, fed from the left over ordinary 16-gauge speaker wire, which comes in the box.
Wireless listening runs on Bluetooth 5.3 with aptX-HD, and the analogue side stays genuinely useful rather than vestigial: stereo RCA in and out, a 3.5 mm mini-jack, and an RCA output that can feed a subwoofer whenever the desk grows. Everything you touch lives on the rear panel of the left speaker, volume and power sharing one knob, a Bluetooth pair button, then the row of inputs.
At six inches tall the two cabinets are small enough to leave either side of a monitor without crowding it, and a power-saving circuit idles the output stage when the music stops, so there is no real reason to ever switch them off. Audioengine was founded in Austin, Texas.
- Designed in
- United States
- Made in
- Austin, Texas
- Materials
- Size
- 6 x 4 x 5.25 in per speaker
- Plays
- Bluetooth 5.3 aptX-HD, USB-C, RCA, 3.5 mm
- Finish
- Six, matte and hi-gloss
Figures as published by the manufacturer. Source
















