About
A mechanical keyboard's feel is normally decided before you ever touch it, in a factory, by someone tightening screws. Mode's Envoy hands that decision back in the form of six small rubber blocks.
The Envoy is a 65% board whose Lattice Mount drops six mounting blocks into recesses milled in the chassis, then rests the plate and circuit board on top of them rather than screwing either one down. Six of the supplied blocks are Voronoi lattices printed on Carbon's DLS machines in EPU41 elastomer: the structure inside the wall flexes, and the keystroke lands soft. Six more are solid blocks of the same material, and those bottom out firmer. The usual arrangement mixes them three and three, front and back, so the top of the board can type differently from the bottom. Swapping blocks is the whole adjustment, and it is the reason Mode kept the lattice mount as its main mounting system for several years afterwards.
Everything else is chosen the same way. The chassis is anodised aluminium at 665 grams or frosted polycarbonate at 301 grams, less than half the mass. Plates run POM, FR4, carbon fibre, aluminium and copper, which Mode ranks in that order from softest to firmest underfoot. The rear accent and the weight take sanded walnut, sand-blasted copper, PVD stainless or polished mirror stainless, and foam arrives as a separate kit of three pieces.
Hotswap and soldered circuit boards both fit, both wired only, both programmable in VIA and QMK. Budget 45 minutes to build the hotswap version and 90 for the soldered one. The Envoy was produced from 2023 to 2025 and is now discontinued, which makes the block kit the part worth checking before you buy a used one.
- Designed in
- United States
- Case
- Anodised aluminium or CNC-milled frosted polycarbonate
- Weight
- 665 g aluminium chassis, 301 g polycarbonate
- Materials
- Plates in POM, FR4, carbon fibre, aluminium or copper
- Colours
- Black, Mirage, Green, White, clear polycarbonate
- Finish
- Walnut, copper, PVD or mirror stainless accent
- Controls
- Wired only, VIA and QMK programmable
Figures as published by the manufacturer. Source


















