About
A mechanical keyboard is thick because the switch is tall. The housing sets the deck height before any case is wrapped around it, which is why most boards with real switches under the keycaps sit high enough to want a wrist rest.
The Keychron K3 uses low-profile switches 40 per cent shorter than conventional mechanical ones, which is how a board with genuine switches stands 17 millimetres tall at the front edge. Keychron starts from that shortened housing, sets it in an aluminium frame over an ABS bottom case, and finishes at 306 by 116 millimetres and 483 grams. The deck climbs to 22 millimetres at the back, and folding feet take the typing angle to 6 or 9 degrees.
The layout is 75 per cent, so the function row, the arrow keys and the navigation cluster all survive the shrink, which is the part a tenkeyless board usually keeps and a compact board usually loses. Bluetooth 5.1 holds three devices at once and switches between them from the keyboard itself. Wired over USB-C the polling rate is 1000 hertz; over Bluetooth it drops to 90. A 1550 mAh lithium polymer cell runs about 34 hours with the backlight at its lowest level.
Two switch choices sit behind those keycaps. Gateron low-profile mechanicals are rated for 50 million keystrokes, Keychron's own low-profile opticals for 70 million, the latter with 0.2 millisecond latency. Both drop into hot-swap sockets, so every switch on the board can be changed without a soldering iron, which matters more on a slim keyboard than a thick one: there is no room inside for a mistake to hide. Mac and Windows keycaps are both included, along with a dedicated Mac multimedia row.
- Designed in
- Hong Kong
- Made in
- China
- Size
- 84 keys, 75% compact layout
- Material
- Battery
- 1550mAh, up to 34 hours
Figures as published by the manufacturer. Source





















