About
Most low-profile keyboards ask you to accept a trade: you lose travel, and with it you lose the feeling that anything happened when you pressed a key. The Flow 2 is built around the idea that the loss is an engineering problem rather than a law.
The Lofree Flow 2 is a low-profile mechanical keyboard machined from a single block of aluminium, with switches that travel 2.8 millimetres where a full-height board asks for four. Shortening a switch is harder than it sounds. The stem has less housing holding it upright, so it rocks in the socket, and a key that rocks feels loose long before it feels quick. Lofree's answer on the Cloud Series switches was tolerance: the moulding gap came down from 0.05 to 0.04 millimetres, and twelve small dots inside the housing bear on the stem to stop it wandering sideways. All three versions take 40 grams of force and are rated for 50 million presses. The linear Surfer and the silent Void register 1.3 millimetres down; the tactile Pulse waits until 1.6.
The plate is not bolted to the case either. It sits on a gasket backed by five layers of dampening material, which is what stops a thin aluminium shell ringing on every keystroke. The keycaps were redrawn to match, double-shot PBT over PC, with the chamfer cut from 0.45 to 0.23 millimetres so the flat you actually hit grew from 194 to 217 square millimetres. That is the sort of change nobody notices and everybody feels. A capacitive strip along the edge scrolls volume and screen brightness, switches lift out without soldering, and the whole layout remaps in VIA.
- Designed in
- China
- Size
- 75% layout / 84 keys
- Material
- Aluminum body
- Surface
- 205-grit anodized finish
- Battery
- 3000mAh, up to 120 hours (backlight off)
- Charging
- USB-C, 3-4 hours
Figures as published by the manufacturer. Source



















