About
A webcam that follows you around the room usually does it with motors. Insta360 built one that does it by moving nothing at all.
The Link 2C is the Link 2 with the gimbal taken out, keeping the same 1/2 inch sensor but tracking you in software rather than in hardware. Where the Link 2 pans and tilts on a two-axis gimbal to keep a person centred, the 2C runs Auto Framing inside the frame the lens already sees, zooming and shifting the crop instead. Deleting the motors is what makes it small: 62.7 by 30.2 by 26 millimetres and 46.5 grams bare, or 111.5 grams once the magnetic mount is on, against 71.3 by 58.9 by 38 millimetres for the gimballed model.
The same subtraction shows up in two smaller places. DeskView, which aims the camera down at whatever is in front of you, happens automatically on the Link 2 and by hand here: tilt the mount, then set the angle in Link Controller. Privacy is a sliding shutter across the lens, where the Link 2 just folds itself face down after ten seconds idle.
The optics are unchanged from the bigger camera. f/1.8, a 26 millimetre equivalent view, 79.5 degrees across the diagonal, and phase detection autofocus that holds from 10 centimetres out to infinity. It records 4K at 30 frames per second or 1080p at 60, with HDR available at every resolution and frame rate, and audio arrives through AI noise cancelling in three modes: Voice Focus, Voice Suppression and Music Balance. Hand gestures start tracking, zoom and call up whiteboard mode from across the room, which matters more on a camera with no moving parts to nudge. A single USB-C cable carries both video and power at 5 volts and 1 amp, so the whole thing lives on one port.
- Designed in
- China
- Lens
- 1/2 in sensor, f/1.8, 26 mm equivalent
- Dimensions
- 62.7 x 30.2 x 26 mm
- Weight
- 46.5 g, 111.5 g with magnetic mount
- Colours
- Graphite Black, Arctic White
- Display
- 4K/30 fps or 1080p/60 fps, HDR at all modes
Figures as published by the manufacturer. Source














