About
An action camera is usually one sealed brick: battery, screen, card slot and lens all locked in together. DJI's Action 2 takes that brick apart and lets you decide how much of it to carry.
The DJI Action 2 camera unit measures 39 by 39 by 22.3 millimetres, weighs 56 grams, and snaps onto a front touchscreen module by magnet. That module is where most of the missing hardware lives. On its own the camera unit runs a 580 mAh cell, good for about 70 minutes of 1080p recording in DJI's own lab test. Attach the front module, which carries a 1300 mAh cell of its own plus a microSD slot, and DJI's figure rises to 160 minutes. The camera unit has no card slot at all, so footage stays in built-in storage until a module is attached to copy it out. The dual-screen combo is both halves in one box.
The split has a cost worth knowing before you buy rather than after. The camera unit alone is waterproof to 10 metres, but DJI states it is no longer waterproof once the touchscreen or power module is attached. The waterproof case takes the pair to 60 metres.
Both screens measure 1.76 inches at 350 pixels per inch. Behind the lens sits a 1/1.7 inch sensor, an f/2.8 aperture and a 155 degree field of view, wide enough that HorizonSteady can rotate every frame level and still have picture left over to fill it. DJI lists guaranteed software updates to the end of 2026, which is a longer commitment than most cameras this size are given.
- Designed in
- China
- Materials
- Storage
- 160MB/s read, 60MB/s write
- Water resistance
- IP68, 10 meters
- Lens
- 155° FOV
Figures as published by the manufacturer. Source


















