Electronic Materials Office·Tech
Altar I
Staff Pick
$349

About
A mechanical keyboard is tall because its switches are tall, and because there is a plastic case with a mounting plate screwed inside it. Electronic Materials Office removed both problems at once, and the result stands 15 millimetres high.
The Altar I is a monobody: one milled block of recyclable 6061 aluminium forms the case and the internal structure together, with no separate plate to add height. The switches are Kailh Choc Low Profile v1 Reds, linear, actuating after 1.5 millimetres of travel at around 50 grams of force. Put the two together and the whole board finishes up slimmer than many keycaps are on their own. The caps themselves are PBT with 50 per cent recycled content, what the company calls waste-derived polymer, and the legends are set in two typefaces rather than the usual one: Tobias from Displaay Type Foundry and GT Flexa from Grilli Type. A rotary encoder knob handles volume. The firmware is ZMK, the open-source keyboard project, so the layers and bindings are yours to change rather than the maker's to approve.
It holds two devices over Bluetooth 5.0 Low Energy and charges over USB-C, and the field manual quotes roughly 500 hours of normal use from a charge, which is about three weeks between cables. There are two layouts, UK English with 78 keys or US English with 77, and both are designed and assembled in London. Even the moulded clamshell it arrives in is meant to be kept rather than flattened, which is either thoughtful or a quiet hint about how you should be travelling with it.
- Designed in
- United Kingdom
- Materials
- Body
- Machined 6061 aluminium monobody
- Dimensions
- 305.5 x 121 x 15 mm
- Weight
- 635 g
- Charging
- USB-C, coiled cable included
- Battery
- Approx. 500 hours per charge
Figures as published by the manufacturer. Source
Newer version
Altar II Electronic Materials Office$349




![Nomad [E]](https://assets.curated.supply/Work Louder_Nomad%20%5BE%5D.webp)









