About
Most of the waste on a multi-colour 3D print never becomes part of the model. It comes out as a purge: a single-nozzle machine swapping filament has to push the old colour through the hotend until the new one runs clean, and that pile of stubby extrusions is the price of every change.
The Bambu Lab H2D is a desktop 3D printer with two nozzles rather than one, so a support material can stay loaded alongside the model material and both go down in the same job. Fewer changes means less purged filament, and it also means a rigid filament and a flexible one can meet inside a single part. Bambu Lab rates the hotends to 350 degrees and pairs them with 65 degrees of active chamber heating, which is the combination that stops PA, PC and carbon fibre filled filaments warping as they cool. Both are all metal, with hardened steel nozzles and hardened steel extruder gears.
Accuracy here is measured rather than assumed. An optical system reads toolhead position to 5 micrometres and corrects as it goes, holding 50 micrometre motion accuracy across the whole bed, while fifteen sensors along the path from spool to nozzle watch feed speed, tension, where the filament tip sits, hotend temperature and extrusion pressure. A macro lens camera stares at the nozzle itself, looking for clogs and stray strands.
Then there is the other job. A 10 watt or 40 watt 455 nanometre laser module turns the same frame into an engraver and cutter, which is an unusual thing to ask of a machine already carrying two hotends and a camera pointed at them.
- Designed in
- China
- Materials
- Body
- Aluminium, steel, plastic and glass
- Dimensions
- 492 x 514 x 626 mm
- Weight
- 31 kg
- Capacity
- 350 x 320 x 325 mm dual-nozzle print volume
- Lens
- Macro nozzle camera
Figures as published by the manufacturer. Source
Alternatives
You might also like
More in Tech
See allStaff Pick

Altar I
$349













