About
Most keyboards that want a volume control bolt a knob to the top right corner. The Node 75 puts a touch zone there instead: slide along it, tap it, double tap it, and a patch of dot matrix LEDs reads the value back at you.
The NuPhy Node 75 is a low-profile mechanical keyboard that quietens itself with a gasket-mounted polycarbonate plate rather than the foam and tape a full-height board can afford to hide inside. There is no room for that stuffing in a case this thin, so the switch plate is cushioned at its edges rather than screwed hard down, and the plate material gives under a keypress where the aluminium in thicker builds stays put. Switches drop into hot-swap sockets, so a Red nano comes out for a Brown or a Blush with the supplied puller and no soldering iron anywhere near the desk. The keycaps are double-shot nSA, legends moulded in as a second colour of plastic rather than printed on top, which is why they outlast the board's own lifespan rather than fading off it halfway through.
The rest reads like a board built to be lived with. Three typing angles, 4, 8 and 11 degrees. North-facing RGB with 20 modes. Polling holds at 1,000 Hz on both the 2.4 GHz receiver and the cable and falls to 125 Hz over Bluetooth 5.0, which is the trade for talking to macOS, Windows, Android and iOS without a dongle. NuPhy's own lab figure for battery life drops to 60 to 100 hours with every light on, so the lighting is the thing you ration, not the typing.
- Designed in
- China
- Size
- 318.1 mm x 141.5 mm x 18.9 mm
- Weight
- 827 grams
- Materials
- Battery
- 4000mAh; 60-100 hrs (lights on), 1000 hrs (lights off)
- Charging
- USB-C
Figures as published by the manufacturer. Source


















