About
A polling rate is the number keyboard makers reach for when they want a headline, and it is also the number that settles the least. NuPhy says so itself, which is an odd thing for a company selling a 1,000 Hz board to admit.
The Air96 V2 is a 13.5 mm low profile keyboard with a full 100 key layout, an aluminium frame and a 2.4 GHz radio link polling at 1,000 Hz, double the 500 Hz its predecessor managed. Thin wireless boards have tended to stop there, and getting past it took two chips working together: a Nordic NRF52810 radio beside an STM32F072 microcontroller. Because matrix scan rate, processing, debounce and cache size all add delay of their own, NuPhy measured the finished board rather than the spec sheet, putting a hardware debug probe on it and timing the gap between the Enter switch closing and the keypress registering on the computer.
The rest of the engineering went into what the thing sounds like. Poron foam above the plate absorbs the hollow ring, an IXPE sheet on the circuit board cleans up the strike, and the V2 adds a PET layer between the two. The spacebar gets its own treatment, tuned with the silicone shaping NuPhy worked out for its GhostBar.
Two RGB bars run down the sides of the frame and are read rather than admired: the left one shows caps lock and connection mode, the right one battery level and system mode. Firmware is QMK and VIA, so remapping happens in a browser on macOS, Windows or Linux, and the switches are hot swappable if the ones fitted turn out to be the wrong weight.
- Designed in
- China
- Dimensions
- 373.4 x 132.5 x 13.5 mm
- Weight
- 663 g
- Battery
- 4,000 mAh, up to 220 hours with the backlight off
- Materials
Figures as published by the manufacturer. Source


















