About
Most metal keyboards sound like metal. The plate bolts into the case, the case is aluminium, and every keystroke travels into the shell and comes back as a faint ring you stop noticing only because you have no choice.
The NuPhy Halo65 V2 is a 65 per cent mechanical keyboard whose circuit board floats on gaskets rather than screwing down to its aluminium top case, so the keystroke never reaches the metal in the first place. Six layers of damping surround it: plate foam, a pad under each switch, a sound damper, and foam beneath the board. NuPhy lifted the arrangement from its own Gem keyboard. Keys land softer and the case stays quiet.
The radio and the firmware are the other half of the argument. The 2.4 GHz receiver polls at 1000 Hz, the same rate as the cable, so wireless is not the compromised mode here, and Bluetooth 5.0 sits underneath at 125 Hz for devices that speak only that. Firmware is open-source QMK with VIA layered over it, which means remapping keys, writing macros and shuffling layers all happen in a browser tab with nothing installed, on macOS, Windows or Linux. A physical switch on the case flips between Mac and Windows function keys.
Keycaps are NuPhy's own mSA profile, a taller relative of its nSA shape, with homing bars moulded in a triple shot so the south-facing LEDs glow through them. The hollow GhostBar spacebar hides small internal chambers tuned to make it sound like the keys either side of it, which is the kind of detail nobody asks for and everybody hears. Four Gateron-made switches are offered: Mint at 37gf, Blush at 42gf, Raspberry at 46gf and the tactile Lemon at 55gf, all on POM stems.
- Designed in
- China
- Material
- Dimensions
- 318.0 mm wide, 114.5 mm long, 28.3 mm back height, 18.5 mm front height
- Weight
- 798 grams (1.75 pounds)
- Battery
- 4000mAh, up to 240 hours (lights off)
- Controls
- Tri-mode: 2.4G/Bluetooth/Wired USB-C, 1000Hz polling (2.4G/wired), 125Hz (Bluetooth)
Figures as published by the manufacturer. Source



















